Baroni Recording Amps: Faithful tone to iconic amps in rock history. High-Voltage Class A tube preamp and analog simulation for direct FOH or DAW use. VARICAB circuit for realistic cab simulations.
Perfect for pedal demos and connecting pedalboard to DAW. Baroni (A Foxgear Brand) Is proud to introduce its first range of Recording Amps with a range of five products designed to replicate five of the most iconic amps in rock history, including , Marshall, Hiwatt, Orange and Vox. Each Baroni Recording amp is made of a High-Voltage Class A tube preamp and a renewed analog simulation that mimics all the chain after the preamp such as the power section, the speaker, the microphone, and preparing the signal in a 100% analog way to go direct to FOH console, or into the Audio Interface of your DAW.
Thanks to the VARICAB circuit, introduced last year into Foxgear’s Miniamp series, and recently updated, and thanks to two separate control of Gain (Body) and Volume on the preamp section, you can truly mimic the behavior of the real amplifier, including the grit or bottom-end/punch usually added by the power tubes before to go to the XLR balanced out with a faithful recreation of your favorite sound with a big advantage: Eating Pedals perfectly. Each Recording Amp also boasts a series fx loop, and a traditional TS Jack out to use as a standard preamp going into the return section of an amp, or into a power amplifier.No dozens of options, just pure tone straight to the point to not comprom.
